CCTV Cameras in Gujarat May Bring Crime Rate Down

Gujarat is a safe state. The crime rate in Gujarat is low as compared to other states in India. According to National Crime Records Bureau (NCRB) report, Ahmedabad has the least crime rate among all Tier-I and Tier-II cities of India. The credit goes to the security measures employed by the state government. However, this achievement is like reaching the clouds when you aim for the moon. The state is trying hard to reduce its crime-rate further.

Main Content:
The use of CCTV (Closed Circuit Television) may give a push to this effort. CCTV cameras help in preventing crime as they help in detecting crime! CCTV surveillance cameras are used in many fields in Gujarat today. Their use in various sectors and their role in deterring crime in those sectors can be summarized below:

* In shopping malls: CCTVs are used in almost all the shopping malls in Gujarat. Surveillance cameras are used to keep shop-lifting in check. The few employees, hired by shop owners, may not be able to keep a watch on the large number of people coming and going! Shop-lifting is possible in such circumstances. A CCTV camera will enable a single employee to monitor many people from a corner of the shopping mall. Even if the thief escapes the first time, his actions will be recorded in the Digital Video Recorder (DVR). Having a picture of the thief may help the police to catch him and retrieve the stolen goods.

* In schools: Many leading schools in Gujarat are properly equipped with CCTV surveillance. Schools install security cameras to keep a track of unwelcome visitors and student actions. The school authorities find it easier to pay attention to violence against children, bullying and juvenile delinquency because of the CCTV cameras and DVRs.
* In office premises: CCTVs may also help in reducing employee theft. A security camera in the premises of a large office will create fear in the minds of the employee of being caught. They will refrain themselves from stealing company stationeries and loiter around. Potential burglars may be deterred from entering the office premises. The trend of using surveillance cameras in offices is picking up speed in Gujarat.

* In railway stations: Central government has announced the installation of more CCTV cameras in railway stations. The major railway stations is Gujarat may also witness this addition. Public places like a railway station are prone to terrorist attacks. If CCTV cameras are installed appropriately, any suspicious activity may be identified. Any future disaster may thus be thwarted.

* On road: CCTV cameras are the most effective in on-road crime detection. The security cameras may read the number plate of the passing car in a hit-and-run case. The sharp eyes of a CCTV camera may observe the actions of chain snatchers, pick-pocketers, eve-teasers and other anti-social elements, if installed on proper places. CCTV cameras are hardly visible on the roads in Gujarat. But they are as desirable on roads as in any other area.

There have been incidents where criminals were caught with the help of CCTV. A leading Gujarati news channel telecasted a theft in a factory in Ahmedabad, recorded by a CCTV camera. The police have the identity of the thieves because of the cameras installed in the factory. In another case, the Gujarat police claims to have photographs of two explosive-laden cars that were found abandoned in Ahmedabad and Surat. The photographs were captured by a CCTV at Pune toll tax. Though the identity of the drivers is not clear in the picture, the photograph is believed to be of help to the investigators. The cops see an underworld motive in the incident.

CCTV helps a single person to keep an eye on the entire area. They help in law enforcement. Gujarat government may succeed in bringing its already low crime-rate, further down, by encouraging the use of CCTV surveillance cameras and DVRs.

Many companies manufacture CCTVs in Gujarat. CCTV Gujarat is a leading producer of CCTV cameras and DVRs in Gujarat. The company can be contacted for good quality and affordable CCTVs. For more information, visit http://www.cctvgujarat.com.

Article Source: http://EzineArticles.com/?expert=Sonal_A_Patel

Why The Sony Smallest 3D TX9 Camera Is NOT Really 3D

When the first 3D cameras where released to the markets it seemed like there is a technological buzz around them. Each of the leading camera manufacturers hurried to show it has a 3D camera capability too. The first 3D digital camera was the Fuji W1, and then came the upgraded W3 model. Sony released the TX9 as the world smallest 3D camera. But it is not really a 3D camera.

The fact that the TX9 is not a full real 3D camera, does not make it a less good camera than it is. It has 3D abilities and they are used by thousands of customers around the world enjoying the new possibilities of 3D. The Sony TX9 is a superior camera to most of the competitors; it includes build in picture modes that can help even your granny take breath taking photos.

In order for a camera to capture real depth 3D, it needs to have two lenses at least. Just like the human eyes. The two lenses capture two different angles of the object they are exposed to.

The camera processor gets the two images and places them one on top of the other, or is able to place them side by side. Only two frames taken together can produce a real depth 3D image.

The Sony TX9 camera, has only one lens at the front, it is actually an advanced upgraded 2D camera, with some 3D picture effects abilities. Because the Sony TX has only one lens at the front, it cannot take 3D still pictures.

If you ask your friend to smile and take a still photo, there will be no 3D effect. There will be only one frame produced from the single lens, and thus there is no option to create a 3D image. Just like seeing the world with one eye closed, no depth perspective can be done.

The Fuji W3 camera (and the former W1 model) has both two lenses at the front of the camera; this means that with every exposure two frames are captured at once. The two framed needed to produce a real depth 3D image.

How then can Sony claim it has the world smallest 3D camera? Simple they have a clever feature that manipulates the scenery helping the camera to make 3D clips.

The Sony TX9 3D camera has a special “Sweep Panoramic’ mode, this mode means that when the camera takes a long panoramic sideways clip. Thousands of frames are captured and stored; the Sony TX9 then stitches those frames into a 3D clip.

How it can take 2D pictures and turn them into 3D? Since the camera was moved (side ways only) when taking the clip, each frame captured has a slightly different angle view of the object. Then the processor is able to place the frames side by side one on top of the other, to show a 3D video clip.

The new Sony 3D cameras have two lenses at the front. The Sony 3D Bloggie released and the Sony 3D camcorder both have two lenses. For most peopleBusiness Management Articles, a 2D digital camera with some 3D effects is far more than they need to enjoy a good camera and 3D options.


Article Tags: Real Depth
Source: Free Articles from ArticlesFactory.com

ABOUT THE AUTHOR 

See Sony 3D Camera features read all about it, make sure you stay ahead of the rest and get all the tips and secrets regarding Fujifilm 3D cameras and accessories.

The Wireless IP Camera

The wireless IP camera is one of the many fairly recent products that came into fruition from the long promise of technological convergence between computers and telecommunication technology. It's one of the crowing jewel of the electronic product lines that far remove not only extended wires attached to security cameras, but it also has everything the digital world has to offer - encryption, data compression and web transmission.

In the early 90's, there was this long desire among technological vendors to merge the advancing computer technology with the current electrical or electronic devices such that you, as an end-user, will no longer have a hard time configuring whatever electronic devices and equipment you want to install at home. Some companies foresaw then the possibility that you as a consumer will be required to learn less the intricacies of the technology to use a particular product at home.

Thus, it is getting easier for you to make use of your basic computer skills to control everything that surrounds you using your very own personal computer or laptop for that matter. It's actually a win-win solution approach - the vendor getting more sales of their new product line and on the other end you, as a user, will have the easier way to manage all sorts of stuff you installed in your home thereby shifting in the mindset from the century-old analog to digital system the way you control your installations of devices or equipments.

Wireless IP camera is just one of these fairly recent products line that incorporates the use of the existing analog system, mainly the transmission between transceivers between the device and the router/modem used for internet connection. You don't need to learn much of the intricacies between the two communicating devices and could just concentrate more of configuring the equipment for your basic home needs.

The signal transmission between the remote camera and the computer are fully un-wired thus saving you the hassle of connecting the unit using the messy wiring. Thus, wireless communication saved you not only the hassle of wires running all over the house but also the danger of faulty wire connection which can lead to faulty wiring accidents which claimed loss of property or worse, lives.

In some countries, wiring electrical/electronic equipment usually requires you to contact professional installers such that when there are troubles around, there would be someone to refer to rather than the user who is maybe in danger of doing the wiring himself that could lead into insurance claims being forfeited. An ordinary household also is running the increased risk of electrocution if he is tinkering around the high voltage wires installed in the house.

Today, there are things that have been so far improved like for example the longevity of batteries and availability of solar technologies that can easily be integrated into the camera system hence improving the possibility of detaching an electronic unit from messy and undesirable home electrical connections when installing a device inside or outside the house and expected to last for many hours without recharge.

So the foreseen integration of electronics and computers into single one unit like this security camera came at the time when all other integrated parts are available or commercially possible.

Jorge is an IT guy who loves any new product lines that improve the lives of homeowners and ordinary users. For more information about wireless camera, you many visit his blog at The Wireless IP Camera or his camera review site at Wireless IP Camera Review
Article Source: http://EzineArticles.com/?expert=Jorge_L_Barba

IP Camera

The most common benefit of an IP camera is the ability to view live video over the Internet from anywhere in the world. This offers the advantage of monitoring a location or property while customer is not physically there to observe activity for suspicious behavior. It is possible to view CCTV cameras over the Internet however additional hardware and software are required. An IP camera has this ability built-in so only an Internet connection is required without any software.

These camera enclosures come with various mounting types. These include pole mounts, wall mounts, ceiling mounts and corner mounts. These different types of mounts allow user to install the enclosure in various environments easily and effectively. Some enclosures are sold with mounts, though some are sold separately. This allows user to use the same enclosure in various different applications by purchasing the necessary mountings for each enclosure installation.

The New IP cameras that are just being recognized are actually only just emerging from the market background. The top models in the range are very good as they bring in a passive, integrated white light and embedded, programmable speaker into the same compact unit, along with a whole new range of specs that are fully optimizable with great options including: Two-way audio 'click-to-talk' button, Controllable auto-flip windows, Begin recording by simply right-clicking in a camera view, Dynamic action buttons - assign outputs, full range PTZ presets, motion events and views as actions to joystick buttons and keyboard shortcuts, Wiper equipment and be activated from the smart client or DVR, AVI export with audio automatically included, Digital zoom within images is now a default for fixed cameras which improves viewing details, 17 languages in the software.

Although most IP cameras come with some form of built-in motion detection, the unpredictability of this technology prevents it from being used in most applications. Using motion detection would also require that there be some way to arm and disarm the cameras so that they do not send images when people are legitimately moving around the protected premises. Due to the familiarity and simplicity of arming and disarming an alarm panel, by far the best option is to have the alarm panel trigger cameras only when it is armed. This way, images are only sent to the server in the event of alarm activation.

One main use of outdoor IP camera enclosures is to protect the camera from weather that would destroy the camera if unprotected against the elements of rain, snow, heat and cold. When looking for an outdoor IP camera enclosure, examine what type of weather conditions the enclosure and camera will have to withstand. If the enclosure will be in an open area which would allow rain to fall on the top of the enclosure, be sure to purchase an enclosure that is properly sealed to avoid moisture penetrating inside. They will want to make sure the enclosure offers proper airflow for the camera. A completely sealed enclosure with no airflow could potentially overheat their camera.

This camera can be used to check whether employees are using the given time to add to the company's prospects and can be used for parental control and allows the parent to keep a close eye on his teenager.

Since some people find the practice unethical, it becomes necessary to install these cameras only when the situation is dire and no other option is available. Even though employees protest when such cameras are being set up, one cannot ignore the fact that a business cannot be run on mere trust. Surveillance, therefore, becomes necessary. Employees tend to dip into the company's account and extract money for personal needs. When such a theft takes place, it becomes difficult to point out who the culprit is. This makes it all the more important to consider an IP camera.

Wireless security cameras technology typically involves a battery-operated camera. It does not store recorded images in its internal memory. What it does, instead, is transmit signals to a receiving device that may be located as far as up to 500 meters away. Remote monitoring can then be done by hooking up the receiver to a television. At present, there is a wide choice of models available for wireless security cameras. So, you have an option between a battery-operated and an AC-powered one.

Some IP cameras also come with a BNC/Analog output allowing customer to connect IP camera to their existing CCTV system. This would allow them to connect the IP camera to their DVR recording station and still have a network connection attached allowing for remote viewing and recording to a PC or offsite location. Be sure to verify the IP camera has the ability to send video to both the BNC/Analog output and through the network simultaneously.

I am Maria Lewis the Freelancer of IP Camera also Write Article on Wireless Security Cameras.
Article Source: http://EzineArticles.com/?expert=Maria_Lewis

IP Camera Specs

An IP camera is a type of digital CCTV camera that requires no wires and which can transmit the information wirelessly. This means that it can also be viewed remotely, and because the information is digital it means it can be edited, sent and analyzed for such purposes as live streaming, e-mail and motion sensors.

However an IP camera will vary in a number of different ways and choosing the precise specifications for the best performance is important. First of all you will need IP cameras that are from a good make. A make like NUUO is highly reliable and well know and this means that you can confidently use the camera and not worry about it breaking or about your having nowhere to take it back.

Once you've chosen a make of IP CCTV such as NUUO then you need to look into the other stats. Importantly this will include the resolution. There are two different types of resolution when it comes to IP CCTV. The first is spacial resolution and this refers to the number of pixels that you can fit on the screen. This is what we normally think of when we use the term resolution and the same as the intended meaning when you're talking about televisions. With a television the set with the high resolution will be the one that can fit more pixels on the screen and thus show more information in more detail.

This will be indicated by the 'megapixels' of your camera. The higher this number the more pixels there are on the screen and the more detail you'll be able to make out. This is important for such things as seeing the perpetrator's face in enough detail that the police can identify them.

The other type of resolution is 'temporal resolution'. Temporal means time, and so this means how many frames of footage you can fit in over a set time frame. In other words a high temporal resolution will mean that the image runs smoothly and looks real, whereas a low temporal resolution will look jerky or flickery. This is also what's known as the frame rate and it is measured in 'FPS' which means 'Frames Per Second'. In other words the higher the FPS, the more separate frames of animation you'll see in a second and the smoother the footage will be. This is again important to ensure that you catch everything that transpires. A very slow frame rate might be enough to miss certain actions and to miss the criminal shoplifting or vandalizing. You may then find that you have insufficient evidence with which to prosecute.

Of course this affects the size of the file and the higher the frame rate and definition the larger the files will be and the fewer you can fit on various kinds of storage. Thankfully that's not a problem as most IP CCTV will allow you to set lower frame rates and resolution should you want to. Likewise though you may want to choose the camera with the best file format that allows for the smallest file size while saving all the information.
When choosing IP CCTV there are many factors to consider. Make sure to choose a good make such as NUUO. Visit the links for more information.

Article Source: http://EzineArticles.com/?expert=Emily_Robinson

IP Camera Versus Web Cam

First of all, what is the difference between an IP (Internet Protocol) Camera and a Web Camera? Although IP and Web Cameras have similar functionality, they are quite different.

IP cameras are closed circuit television cameras, also known as CCTV cameras. They use Internet Protocol to transmit the image data and control signals over a high speed internet connection. These cameras are primarily used for surveillance and monitoring. There are also features like wireless, 2 way audio, Power Over the Ethernet which allows for just one cord, digital zoom and motion detection.

Web cameras on the other hand are more of a social tool. They are a video capture device that is connected directly to the computer. First, unlike IP cameras, webcams can only be used and viewed by the one computer it is attached to. The cameras can be set up to be viewed from various computers with internet.

Secondly, a web cam is typically used to as a communication tool between users. You can chat and see your friends in real time, set up conference calls, take pictures and videos and send them to friends and family.

Webcams tend to be on the cheaper side, costing less than $50, while Internet Protocol cameras can range from one hundred to thousands of dollars. And depending on the manufacturer and what is offered, IP cameras are a bit more complex and require technical knowledge and know-how in order to set up.

Webcams usually require connecting the camera and installing the software. Most IP cameras require you to install software and complete a few more complicated steps like configuring the camera to the network, etc.

Then there are companies that cut out the process for you and allow you to view your camera from a website.
Rachel Quach
LiveLine
Affordable & Easy to Set Up - No Software Required
Monitor your home or business from any computer

For more information visit:
http://www.liveline.net
Article Source: http://EzineArticles.com/?expert=Rachel_Quach

IP Camera - How It Works

IP camera is a video camera with a web server that is built in it; it can be controlled, monitored and viewed from any location using high-Speed Internet. An IP camera has its unique IP address and built-in computing functions to manage network communication. All that is necessary for watching images over the network is built into the unit. The IP camera can be defined, in simple terms as a combination of a camera and computer. Like any other network device it is connected directly to the network, software for Web server, FTP Server, FTP client and e-mail client is built in the camera. It also contains alarm input and relay output. Advanced network cameras are equipped with several other functions like motion detection and analog video output. Camera component of the IP camera captures the image and converts it to electrical signals. After converting these signals from analog to digital format, they are sent to the computer function; this function compresses the image and sends it out over the network.

The image is focused onto the image sensor (CCD) using lens of the camera. All images pass through the optical filter before reaching the image sensor; it removes infrared light in order to display the correct colors. The image which is composed of light information is changed into electrical signals by the image sensor. These changed electric/digital signals can now be send over networks as they are now in a format where compressing is possible. The exposure (light level of image), white balance (adjusts the color levels), image sharpness, and other aspects of image quality are balanced and adjusted by the IP camera.

To connect to the internet, several transmission types are available. Standard and ISDN Modems, DSL Modems, Cable TV Modems, T1 Connections, and 10, 100, and 1000 Mbit Ethernet Connections are some of them. Cellular Phone Modems and various Wireless Network options are other available options. Hard disks can be used to store digital images. One hard disk is capable of storing several million images. The computer can be programmed to remove old images and make space for new images when the hard disk is full.

Detailed image means more pixels, which in turn means more data. But bear in mind that more detailed images occupy more space on the hard disk and they require more bandwidth for transmission. Hence data must be compressed before storing and transmitting images over the network, otherwise data will require more disk space or bandwidth. In the case of limited bandwidth, lowering the frame rate/accepting a lower quality image, significantly reduces the amount of data being sent. JPEG and MPEG are most used compression standards that transmit high-quality Video; whereas the H-standards which are commonly used in video conferencing do not create clear images of fast-moving objects. Light level of 200 Lux is minimum requirement to capture good quality images. After installation and configuration, the IP Camera can be accessed independently from any Web Browser. The IP camera is an independent entity which has its own IP address.

Author sells Bosch CCTV and other Bosch security systems with Australia's leading security store.
Article Source: http://EzineArticles.com/?expert=Emily_Robinson

Highly Advanced Wireless IP Cameras

Dinodirect, an online shopping store, presents 1/4 CMOS Sensor Pan/Tilt Wireless IP Camera XF-IP49, an IP Wireless Camera whose unique features and style makes it a must have for your computer. These Wireless IP Cameras comes with � CMOS Sensor. The image compression format for this IP Wireless Camera is Standard M-JPEG with its image resolution being VGA (640x480)/ QVGA (320x240) which gives a better picture of the person sitting on the end.

Operating Temperature ranges from 0 Degree - 5 Degree whereas the Operating Humidity is 20% - 85% and is non-condensing .Similarly the Storage Temperature is between 10 Degree - 60 Degree and Storage Humidity is from 0% - 90%and is once again non-condensing. Now we have webcams like IP Wireless camera. These Wireless IP Cameras are wireless that is they are portable and better than the old webcams.

This wireless camera is simple and quick to setup and use and has a user-friendly interface. It even allows remote viewing video and record from any internet connection. The IP camera is a stand-alone network device, which can operate without the support of a PC. This means the camera does not rely on software from a PC to help it produce images.

The frequency of these Wireless IP Cameras is 50 Hz, 60 Hz or Outdoor. It has the largest image transfer rate of 30/SEC (QVGA), 15 Frames/Second (VGA). The illumination of this IP Wireless camera is 0.5 Lux @550 nm. The Wireless IP Cameras have glass lens whose viewing angle is 90 Degrees with Ethernet of one 10/100 Mbps RJ-45. The protocols it supports are HTTP, TCP/IP, SMTP, DHCP, DDNS, and UPnP. What else would you demand in a webcam?

Yet if you are not satisfied, it has wireless standards of IEEE 802.11 b/g with data rate of 802.11 b: 11Mbps (Max.), 802.11 g: 54Mbps (Max.). The pan/tilt of this IP Wireless Camera is horizontal and ranges from 0-270 whereas vertical is 0-120.It even has Infrared Light which are 11 IR LEDS and has Night Visibility Up to 10 Meters. The Power Supply of this webcam is DC 5/1A (EU,US, AU adapter or other types optional) and Power Consumption is 5 Watts (Max.).

This alluring product is available at economical rate, and the package includes 1 IP wired camera, 1 Wi-Fi antenna, 1 bracket, 1 adapter, 1 CD-ROM and 1 Network cable. So what are you waiting for? Go and get your camera today!


About the Author

DinoDirect China Limited (www.dinodirect.com) is one of the biggest global online retailers. It offers a great quantity of products with competitive price by cutting the middleman and offering products directly to the terminal consumers. DinoDirect possesses a great many software products with proprietary intellectual property rights, owns technological superiority and an efficient marketing team among the similar industry.

Installing an IP Camera

Bought that IP camera you've chosen and researched about for the past couple of weeks? Now, all that's left to do choose which rooms to put it in, where and how to place it, and finally install and configure it. Sound like a lot left to do right? Depending on how much work you are willing to put it, it doesn't have to be.

When deciding on where to put an IP camera, the first step is to choose which room the camera will be installed in. It's a no-brainer for you to choose the room where the object or person you want to safeguard most frequently is in. After deciding which room to put the camera in, you should decide where in the room the camera will go. It's ideal to put the camera in a place where it will least likely be displaced and which will give you a wide viewing angle so you can see as much of the room as possible.

Thanks to its wireless nature, IP cameras are far less constricting than other types of security cameras. IP stands for 'Internet Protocol' and the whole idea is for the camera to operate wirelessly and make use of this medium to transmit data. Being wireless, you now have a lot of choices on where you can put your IP camera. Also, being free from wires adds to the whole hidden camera thing - a wireless IP camera is more discreet than one with wires leading all to it.

Knowing all this, you probably came to the conclusion that you should put your IP camera at an elevated location, and you would be right in thinking that. Having your camera at a high place would give you the best possible view of the room, and combined with a wide angle lens would give you a really great view of the area you would want to keep watch on.

Also, because of the elevated location your camera is on, this means that the amount of obstructions such as moving objects would be kept to a minimum. Lastly, having your IP camera at a high location means that there is little chance of it being displaced, tampered with, or even stolen. This is extremely important if you want your camera to be monitoring the room at all times. With your IP camera high, it can do it's job effectively and should something go wrong and you suspect that someone is trying to do something to your camera, it will be easy for you to determine what that is.

Once you have decided on where to put your IP camera, you now have to decide whether it should be visible to people who enter the room. This is a tough decision - if you keep the camera hidden, it is more likely to catch would-be vandals or thieves who enter your room; if you expose the camera however, those same persons may not even attempt to go through with what they are planning to do for fear of being captured on camera.

About the Author

Spy Store Pro is a leading and fast growing company that provides security and personal safety cameras. For more information on hidden security cameras hidden security cameras and wireless spy cameras please check out Spy Store Pro.

What is the Difference Between an IP Camera, Network Camera and Internet Camera?

A few people have asked me, what is the difference between an IP Camera, Network Camera and Internet Camera? Well the answer is quite easy - there is no difference. So why do these security cameras have different names? First, think about all the names. What do they all have in common? Each name refers to a device that can be connected to a network via IP and used over the Internet.

Axis Communications is the leader in IP Network Video. They use the name Network Camera for their IP enabled security cameras. The name Network Camera is one of the most common names for these products. The name simply describes how their products work by connecting to a computer network allowing all PC's and network devices to see the camera.

The name IP Camera is starting to become more common than the name Network Camera. Most manufacturers refer to their products as IP Cameras and because of this, most customers looking to buy these products refer to them as IP Cameras. Some people even mix the term IP Camera with Network Camera to call it an IP Network Camera. This is the term I like to use as well.

Lastly, is the name Internet Camera. The main camera manufacturer that uses this term is D-Link. They refer to their cameras as Internet Cameras because the camera can be configured to be viewed over the Internet from any remote location. As you probably know, that is one of the main benefits of using these cameras. The term Internet Camera is not widely used as the other two terms but it still describes the product to a tee.
Another article posted on NetworkCameraReviews.com discusses how to make IP Network Cameras accessible over the Internet. The article is entitled "Viewing an IP Network Camera over the Internet". Those of you who need guidance on this process will find this article very useful.

In conclusion, whether you call these products Internet Cameras, IP Cameras, Network Cameras or even IP Network Cameras - you are using a correct name. They all describe the purpose of these cameras and one of their key benefits of how they are an advantage over old Analog CCTV (Closed Circuit Television) security cameras.

About the Author

Wes Fernley runs a website called NetworkCameraReviews.com, a free online resource for users to learn about IP Network Cameras. He provides free consultation and advice. His roles include tech support, web design and sales. He can be reach via email at

Smartec announced megapixel IP-camera with SXVGA, audio channels and SD-card

Smartec product line of the network cameras has been supplemented with the new STC-IPM3095A Day/Night camera, designed for video surveillance of the applications with higher requirements for image quality. Due to Sony ExViewHAD CCD, this megapixel IP-camera can transmit video in MPEG/M-JPEG with up to 1280x960 pix. resolution at up to 25 fps. In addition, STC-IPM3095A features Day/Night software function and PoE technology. New camera is equipped with audio I/O, motion detector and SD-card slot with 2 GB SD-card (supplied).

New megapixel IP-camera transmits video in SXVGA (1280x960 pix.) resolution at up to 15 fps, whereas in VGA (640x480 pix.) or QVGA (320x240 pix.) video frame rate will increase up to 25 fps. In this case, megapixel video from the network camera can be used for archive storage, while video with lower resolution is appropriate for transmitting to the remote users or recording on external media.

Unlike many analogues STC-IPM3095A is equipped with Sony ExViewHAD megapixel CCD that allows camera to transmit video with improved color rendering and S/N ratio. Due to 1.3 Mpix resolution, this megapixel IP-camera can be installed at the applications with higher requirements for image quality. In addition, digital zoom function helps the operator to monitor every part of the application.

Easy Day/Night function allows the operator to set up STC-IPM3095A operation mode under different light conditions. When selecting B/W or Color mode IP-camera will transmit B/W or color images respectively in all light conditions under 0.4 lux of minimum illumination. In addition, the operator can set the sensitivity level at which megapixel IP-camera will switch automatically between B/W and color modes.

To prevent accidental switching between Day and Night modes this megapixel IP-camera enables the operator to select the switching delay time. This option is especially useful to avoid camera switching in Color mode when IP-camera is briefly illuminated by the car lights.

Another advantage of this megapixel IP-camera is its ability to transmit simultaneously two video streams over the network, which helps the operator to optimize image quality for the IP-channel bandwidth. For example, in M-JPEG megapixel IP-camera allows the operator to select the resolution and adjust video compression level. In MPEG-4 the operator can set QVGA or VGA resolution as well as the rate of video broadcast. Due to multicast video transmission support, MPEG-4 can be utilized for remote monitoring (unlimited number of users).

STC-IPM3095A can automatically adjust image brightness by using electronic shutter and lens aperture. To improve image quality in all light conditions below 0.4 lux, it is recommended to use Slow Shutter Mode that allows megapixel IP-camera automatically select slow shutter. Due to the backlight compensation, STC-IPM3095A will transmit clear image even in bright light.
Built-in SD-card slot and supplied 2 GB SD-card provides megapixel video recording without using additional network devices. In this case, the operator can record alarm video as well as pre- and post alarm video streams. In addition, megapixel IP-camera enables adjusting of SD-card cyclic rewriting as well as backup of the information, transmitted to the FTP-server (in case of server malfunction).

STC-IPM3095A is equipped with a web server that allows the operator to view video on any PC through a standard web browser. For deployment of a multi-channel video system it is recommended to purchase NetStation software for processing of up to 64 channels. This software enables remote video monitoring, recording, search and video playback as well as PTZ cameras operation control.

New product offers two ways of power supply: directly from 12/24V AC/DC sources or using Power over Ethernet (PoE) technology. Due to PoE support, megapixel IP-camera can be powered by the same "twisted pair" that transmits video streams and receives control signals. It can reduce installation time of camera and minimize the cost of electrical cable as well. Due to the audio I/O, STC-IPM3095A provides two-way audio communication between the operator and the application.

New Smartec STC-IPM3095A megapixel IP-cameras are offered from stock by Smartec dealers. For more information about STС-IPM3095A and other Smartec equipment, please, send your request to info@smartec-security.eu or contact your Smartec dealers directly.

About the Author

Eugene Azarell
Smartec Company (http://smartec-security.eu)

IP Cameras and Airport Surveillance

Airports are one of the most congested areas at any given time. Furthermore, in light of the recent events it's apparent that they need more security than ever before. Airports have a lot to manage when it comes to security and safety as people are constantly coming and going. IP cameras can record all the action at any given time.

Advantages of IP Cameras in Airport Terminals
- With IP cameras you get the benefit of real time surveillance directly to any place over the internet. What this means is operators can watch baggage claims, check-ins and other hazardous areas from all over the world including police stations, customs rooms and fire and medic aids. This real time remote surveillance offered with IP cameras is something no airport should be without.

- IP cameras can also keep surveillance on all illegal activity including drug smuggling and terrorism. It can record on command through motion detectors and upload video directly to the internet. For investigative searches and evidence, this is a critical feature. IP cameras store and record the information in digital form which offers almost unlimited storage space.

- Another benefit to IP cameras is that they are scalable meaning they can grow with the airport.

- Furthermore, IP cameras can be set up as wireless cameras which offer lower installation costs as well as covert video surveillance.

- Finally, IP cameras work with intelligence technology that allows them to record on motion as well as recognise suspicious individuals. This may seem hard to believe but IP cameras can actually use facial recognition and other algorithms to seek out illegal activity and record immediately. This is done using a technology called Video Analytics and Facial Recognition Software.

- However, it's important to keep in mind that IP cameras should not be substituted for actual guards and security team members. An over reliance on any video surveillance should never replace human security. Instead, it's important to incorporate both people and IP cameras in your surveillance strategy.

Tips for Successful IP Camera Surveillance Set Up
- Look to the trends of the past to determine where criminal activity has taken place.

- Work with the current airport security systems that are already set up. Perhaps re-installation is not necessary in some instances.

- Consider the security personnel that work the airport- where are there usually hidden spots? Where are the blind spots in the airport?

- Look to the past trends to determine which airports should be considered high risk in terms of drugs and terrorism. This should be targeted with IP cameras.

- Make sure you position cameras at all entrances and exits of the airport as well as outside the terminal and in places that link to trams or trains. Illegal activity often takes place outside the terminal on the various transportations.

- Consider the rush hour times for the airport.

- Monitor all open areas as well as constant surveillance on the planes and equipment.

- Finally, make sure you include cameras in restricted areas. Authorized personnel may be a threat in airport situations as well.

About the Author

Network Camera Store is an online store that specializes in network cameras, network camera software and accessories. For information on purchasing, supporting or learning about IP Cameras, visit http://www.NetworkCameraStore.com

IP Cameras in Traffic Environments: Advantages, Risks and Configuration Advice

In today's fast paced world, it's more important than ever to have proper traffic and road video surveillance. One of the best options are IP cameras which function as a closed video surveillance system but have the additional feature of being able to work online. IP cameras can be set up along busy roads and intersections on the highway. They can record traffic patterns and keep speeding down.

Additional Benefits to Traffic IP Cameras
1) Law enforcement tools: IP cameras can be used to enforce speeding laws and ticket those who violate the traffic rules.

2) IP cameras can be used to view live traffic from anywhere in the world. This can aid both commuters and traffic investigators who are monitoring the roads. With live recording, the cameras can be streamed to the television or Internet web browsers and radio for instant updates and up to the minute reports.

3) IP cameras are able to record video to a remote PC over the internet. In road accidents, this is a valuable investigative advantage.

4) IP cameras work with intelligence surveillance where they record only on motion.

5) IP cameras can also encourage safe driving as no one wants to be caught speeding and pay the fine.

6) With IP cameras and Power Over Ethernet, there is no need for cables and this lowers wiring costs and installation time. In fact, some cameras come with a wireless option so there is only a wiring need for power.

7) If something does hit the IP camera, there is an automatic motion detection which begins recording and sends out automatic SMS and emails. What this means is that traffic monitors will know if someone hit the pole and caused an accident even before the ambulance is called.

8) IP cameras come with control pan/tilt/zoom features so you can view all corners on the road and all traffic directions.

Risks and Recommendations with IP Cameras
1) The Weather Aspect: no one can control how the weather will turn out and sometimes heat, wind, rain and snow can have damaging effects on video surveillance cameras. However, these cameras are made durable and resistant to most weather conditions.

2) When it comes to traffic surveillance set up and configuration, it's always best to consider the major roadways in the area, especially the problem areas.

3) Also consider when the traffic is the heaviest and where people are most likely to speed or run a red light.

4) Make sure all the intersections are covered, especially the troublesome areas.

5) Some IP cameras come with flash or light night recording sources which can be a big help, especially considering many accidents occur at night after a long day of driving or a night of drinking

6) With an IP camera you can tilt the camera to ensure it hits the license plate of your offenders

7) It's also a good idea to use environmentally controlled housing enclosures to protect against the various weather risks

About the Author

The Vivotek SD7151 and SD7313 are ideal IP security cameras for traffic environments. They offer reliability and high quality video for surveillance and monitoring. These cameras are available at Network Camera Store.

Using IP Cameras in Prisons and Correctional Facilities

In prison and correctional facilities, it's critical to have a proper video surveillance system. This is why more and more prisons are opting for the IP Camera which works like a normal surveillance camera but with the added benefit of internet access. In a prison or correctional facility, where violence, drug use and officer misconduct are common occurrences, the more advanced the video surveillance, the better.

Benefits of IP Camera Surveillance Equipment

- The ability to record video to a remote PC over the internet

- The ability to be everywhere in the prison, without actually having to be there.

- Prevent prison incidents by being able to spot suspicious activity before it can get any further

- The ability to record on command - intelligent surveillance begins to record only on motion

- Notification on motion detection sent via email, FTP and SMS to prison guards

- Provide visual evidence which can be sent via wireless internet which can be extremely valuable in investigations of prison incidents.

- Maintain order and control and reduce assaults, drug smuggling and other illegal activity

- Remote video monitoring- the ability to view live video from the prison over the Internet from anywhere in the world

- With IP cameras there is no need for a power cable as they work with Power over Ethernet. This means lower installation costs and less wiring for better security and secrecy.

Risks and Resolutions of IP Video Camera Surveillance

- Tampering: many inmates attempt to tamper with video cameras. However, the IP camera comes with a motion detector that will automatically record the moment it detects motion.

- Privacy Protection: many believe that IP cameras take away the privacy of both guards and inmates. However, in most instances, constant IP surveillance is a necessary aspect of prison life for both the security and safety of the inmates and the guards.

- Over Reliance: in some instances, an over reliance on IP cameras and other video equipment can cause laziness. Ensure there is a balance between prison guards and IP cameras. Both are necessary for effective surveillance.

Proper Configuration of IP Cameras
It's important to look at all the different options when it comes to setting up and configuring your security camera system. Keep the following in mind when installing your IP cameras

- There are low risk and high risk areas within all facilities. Make sure you target both.

- Are there drug users and drug smuggling in the facility?

- Are there certain guards or prisoners that are in constant conflict and possible mistreated? If so, set up cameras where this mistreatment usually takes place.

- Where are the violent outbursts usually going on? In the common room? Outside? Having IP cameras installed there can keep track of the culprits and gain the evidence needed. Setup Advice for the IP Camera

- Make sure you position the camera over the prison yard, hallways, stairwells and other areas where inmates may be escorted. Other areas include entrances, exits and independent cell blocks. Do not limit to use dining, recreational and booking areas. The more cameras, the better.

About the Author

The Vivotek FD7141 and FD7141V are ideal IP security cameras for prisons and correctional facilities. They offer high quality video with vandal proof design. These cameras are available at Network Camera Store.

IP Cameras vs. Analog Cameras – Advantages and Disadvantages

If you are looking to install security cameras in and around your house or business, the first question that comes to your mind is what type of camera you should install. Is an IP network camera the best choice, or should one opt for traditional, tried and tested analog cameras? To make the right decision you need to seriously look into the advantages and disadvantages of both and come to a fair conclusion.

The major difference between the analog and IP camera is the way in which the video signals are delivered. IP network cameras digitize the video signal using a specialized encoder that connects directly to IP networks and allow users to view, store and analyze full motion video from anywhere on the network via a standard web browser. Analog cameras turn the video signal into a format that can be received by a television or other receiver, such as a VCR or monitor.

Pros of IP Cameras

Better Wireless Reception - IP cameras are highly secure and encrypted and also need authentication for access. These cameras also have a greater field of view, and, being digital, no unnecessary conversion is required. So image quality remains high even when transferred over the network.

Ease of Installation - No extra wiring is required as you can use the existing network wiring within your home. This can make the installation task much easier. A built-in gateway separates internet cameras from the regular data network so the influence of video recording on bandwidth is minimized.

Remote Accessibility - IP network cameras connect directly to IP networks and allow users to view, store and analyze full motion video from anywhere on the network via a standard web browser. IP cameras are better suited especially for remote surveillance needs.

Real Time Event Recording - The IP camera system is more efficient as it records events in real time and provides alerts in case of any suspicious activity.

Extended Range - It is easy to extend the range of the security camera cabling long distances using IP, or internet protocol. This can be achieved using routers and switches.

Cons of IP Cameras

Higher Price - The prices of IP-based cameras are slightly higher than analog cameras due to the additional technology built into the camera. There are many lower end, low resolution IP cameras that are low in cost. But high-end IP and megapixel cameras are very expensive, and the disk storage required for higher volumes of video data also significantly increases the expense.

Higher Bandwidth Required -- IP cameras require more bandwidth than analog cameras.

Pros of Analog Cameras

Cost - Analog cameras cost less than IP Cameras. The cost advantage of analog recording is especially true for users who already have a legacy coaxial or UTP wiring in place and do not need to install a large number of cameras (analog cameras require a lot of wiring, which can be expensive and disruptive in terms of site modifications).

Larger Variety - There is a huge variety of analog cameras in various sizes and shapes to choose from. The analog cameras allow you to mix and match camera equipment, thus saving a lot of money during repairs.

Cons of Analog Cameras

Investment Cost for Security of Larger Areas - Installation costs over large areas are exorbitant. The number of monitoring stations is limited as the investment needed to repeat costly switching infrastructures is steep.

Cabling - Adding more network cameras to the system is very difficult because each camera requires its own cable. Image quality is also lost when long cables are used.

No Real Time Recording- Traditional CCTV systems record events that can only be viewed after the event has occurred.

Advanced analytics is one of the outstanding features of IP video cameras that simply cannot be matched by traditional analog CCTV systems. It offers so many advantages that this feature alone can often justify the IP solution. When weighing the pros and cons of analog and IP cameras, the decision ultimately comes down to your specific surveillance needs. Once you make an accurate assessment of your requirements, the decision on which camera type to go with will become much easier.

Instructions of Hootoo IP Camera Setup and Software Firmware update

Recently more and more customers have purchased Hootoo IP camera. For some green hand, it requires more to set up this Hootoo IP camera. As a consequence, I prefer to post the Hootoo IP camera setup steps. Hope this will help you while receiving our products.

Step 1: Hardware Instruction.
1. Install the Wi-Fi antenna.
2. Plug the power adaptor into camera.
3. Plug the network cable into camera and router/switch.

Step 2: Software Installation.
Install the follow software:
1. IP Camera Tool: Open the CD, click "IPCamSetup.exe"--"Next"--"Next"--"Close".
2. ActiveX: Click "Appinstall.exe"--"Next"--"Install"--"Finish".
After this done, the icon "IP Camera Tool" will be displayed on desktop.

Step 3: Real-time Video Demonstration.
1. Login:
Double click "IP Camera Tool" icon on desktop, search the IP address, choose the one of your camera, double click to go to IE login interface.
Default username: admin
Password: no password.

2. Choose the language.
English, Chinese, Spanish, German, Portuguese, French, Italian, Korean optional.
3. Choose the work mode.
IE browser: choose ActiveX mode.
Safari, Firefox, Google browser: Server push mode.
Mobile phone: sign in mobile phone.

4. Sign in.
Click Sign In, then can get video on real-time.
No pictures problem with ActiveX Settings for IE Browser
If use IE browser to connect the camera for the 1st time, maybe there is no image displayed, and there will be a clue to install the ActiveX. In this case, please do the follow steps:
1. Close the firewall of your computer.

2. Change the ActiveX settings, "IE" browser > "Tool" > "Internet Options" > "Security"> "Custom Level" > "ActiveX control and Plug-ins", all the ActiveX options set to be "Enable":
In addition: you can also click "start" menu->"Internet Explorer", choose "Internet attributes " to enter, or via "Control Panel" ->"Internet Explorer", enter to Security setting.

3. If there is still no image, please close your anti-virus software, and then try step 1 & 2 again.

Wireless Settings
1. Make sure the router is wireless router.

2. Make sure the Wi-Fi antenna installed.

3. Make sure whether there is encryption of the WLAN of router, if there is encryption, keep the key.

4. Login the camera, click "Network">"Wireless Lan Settings">"Scan", please scan 2 times, then you will find the WLAN from the list, choose the one you use.

5. If there is no encryption, just click "Submit", if there is encryption, please input the key, then click "Submit".

6. Wait about 30 seconds, the camera will reboot, then unplug the network cable.

How to use DDNS
1. Login the camera:
Click "Network">"DDNS Service Settings".
2. Choose the DDNS, there are 2 options:
Manufacturer's DDNS: This domain is provided by manufacturer.
Third Party DDNS: This domain is provided by the 3rd party, such as Dyndns, Oray, 3322 etc.

Third Party DDNS
If you use third party DDNS, please choose the server you use, such as "3322.org" or "dyndns.org" as below:
You have to register an account firstly, keep the user, password, host, then input it.
Note: Only one DDNS can be chosen, for example, if you use manufacturer's DDNS, the 3rd one won't work, if use the 3rd DDNS, the manufacturer's one won't work.

3. Change the camera's port.
The default port of camera is "80", please change "80" to any other one you like, such as "81", "100", "8091" etc.
Click "OK", the camera will reboot, wait about 30 seconds.
Make sure the "Subnet Mask", "Gateway", "DNS Server" is the same as your router.

4. Set Port Forwarding in the router.
This is the most important step. Set port forwarding in router refer to the IP of your camera correctly, then the DDNS will work. Because there are so many kinds of routers from all over the world, so it's difficult to show a fix steps, but there are some samples of different routers' port forwarding settings as below, just for reference:

TP-LINK:
(1) Login the router.
(2) Choose "Forwarding", select "Virtual Servers"
(3) Click the Add New button, pop-up below:
Fill the service port (except 80), IP address of the camera, then click Save
The port and IP address should be the same as Camera.

BELKIN:
(1) Login the router.
(2) Choose "Firewall", select "Virtual Servers"
(3) Input the port (except 80) and IP address, then click save.
Note: The port and IP address should be the same as Camera.
DLINK:
(1) Login the router.
(2) Choose "Advanced", select "Virtual Servers"
(3) Input the port, IP address, Protocol, then click save.

Note: The "public port" & "private port" should be the same as camera's port, choose the protocol to be "both".

After all these 4 steps done, then you can use the DDNS freely, check the DDNS status from the camera as below, and get the link of DDNS for internet view.

Step: "Login">"System">"Device Info":
Thanks for your support and attention, for further operation details, please check the full version user manual of our IP Cameras!

About the Author

Hootoo.com

Wholesalespycams 1/3 SONY CCD Wireles gun shape IP camera (NTSC)

More Bathroom Spy Camera information can be found online at:
http://www.wholesalespycams.com/Wholesale-Discount-bathroom-spy-camera_c628.htmlDescription:
Wireles gun shape IP camera,1/3 SONY CCD
wireless:802.11b/g WIFI standard wireless network card inside
Main Feature:
operation system: Embedded Linux OS
Microcomputer processor: 32Bit RSIC Embedded Processor
Video Compression format: MPEG-4
Signal system: NTSC
Frame Rate: NTSC:30fps
Resolution: D1(720*576), CIF(352*288), FIELD (720*288), QCIF(176*144)
Video Adjustment: brightness, contrast, chroma, saturation.
sensor:1/3 SONY CCD
Horizontal Resolution:420 line
minimum illumination: 0.1 LUX/F1.2
S/N ratio: >48dB
shutter speed: NTSC:1/60s- 1/100,000s
white balance, backlight balance: auto
Lens standard 6mm Optional:3.6mm 8mm CS interface
Nightvision : no
Audio processor: one way audio,MIC inside
Audio gain :AGC
P/T: accept external connection RS485
protocol: PELCO-D protocol Baud rate 9600 address 1
network interface: RJ-45,10/100Mb,self-adaptable Ethernet slot
delay time: < 500 MSEL(0.50 second) in lan
network procotol: TCP/IP HTTP ICMP DHCP FTP SMTP PPPoE etc.
RTSP: support RTSP 3G cell phone( support Nokia Sybiam S60 System, Windows mobile system)
Simultanious visitor: Support 15 direct visitors at the same time but no limitation when using forwarder
Server.
IP mold: Dynamic IP address,Static IP address,PPPOE
Alarm input/output :2/2
Alarm detector: Motion detection setting
Alarm action :support Email photo FTP photo FTP video message,etc.alarm
System requirement : Microsoft Win98 SE/ME/2000/XP/Vista, Internet Explorer 5.0, NET4.5 or above
Safety Settings: Supports the two-level password: administrator authority, user authority
DDNS: Free DDNS bounded i.e., http://demo.easynp.cn.
superiority: p2p technology,have no restrict on observe numbers.Cell phone video supervision
desktop center detection management software(free) 1,4,9,16,25,36 64 monitor pictures in one screen of
client software,focus supervised,remote access, remote replay recorded by Mobile.
Specification:
material: Aluminum alloy material
use environmrnt : indoor use
power :DC12V 2A
Temperature:-10~50 centigrade
Humidity: 95% RH
item size: 158mm x 60mm x 59mm(LxWxH)
packaging size: 210mm x 170mm x 85mm (LxWxH)
weight net 445g gross 845g (Note: All products as per the material subjects)
Package Content
One Wireles gun shape IP camera
Adaptor
CD(including introduction Manual)
bracket
http://www.wholesalespycams.com/13-sony-ccd-wireles-gun-shape-ip-camera-ntsc-p-454.html
http://www.wholesalespycams.com/13-sony-ccd-wireles-gun-shape-ip-camera-ntsc-p-454.html
http://www.wholesalespycams.com/13-sony-ccd-wireles-gun-shape-ip-camera-ntsc-p-454.html
http://www.wholesalespycams.com/13-sony-ccd-wireles-gun-shape-ip-camera-ntsc-p-454.html
http://www.wholesalespycams.com/13-sony-ccd-wireles-gun-shape-ip-camera-ntsc-p-454.html
http://www.wholesalespycams.com/13-sony-ccd-wireles-gun-shape-ip-camera-ntsc-p-454.html
We offer:
Bathroom Spy Camera, Bedroom Spy Camera, Hotel room Spy Camera, Shoes Spy Camera/DVR, Spy Gadget/Device, Car Security Camera, Sport Camera/MP3 Camera, Youtube Spy Camera DVR,CCTV Spy Camera, Spy GSM Audio Bug, Spy Camera Detector, Spy Clock Camera DVR, Inspection Camera, Mini DVR, Wireless Spy Camera, Professional Spy Camera, Pinhole Camera, Spy Lighter Camera, Spy Button Camera, Spy Car key Camera, Spy Pen Camera, Spy Watch Camera, Spy sunglasses Camera , Spy Hidden Camera.
More Spy Camera information can be found online at:
http://www.wholesalespycams.com
http://www.eyespychina.com

About the Author

Wholesalespycams Bathroom Spy Camera,Pinhole Camera,Covert Camera,Professional Candid,Mini DVR,Hidden Spy,Eyespychina Camera.
More Bathroom Spy Camera information can be found online at:
http://www.wholesalespycams.com/Wholesale-Discount-bathroom-spy-camera_c628.html

A Hot Show + Good Camera Work = A Killer Promo Video

Booking a live show is a huge opportunity for up and coming artists to showcase their talent. Everyone has heard the incredible stories of a unknown artist being discovered by a major record label in some small club where they were performing. The media hypes these stories with a blitz of press that you can't help but notice. This hype fuels the dreams of many artists seeking music stardom.
The reality is a great majority of independent artists do not end up with record deals period. The truth is the music industry doesn't want you or your music until you can start your own buzz. It doesn't matter how good your music is. If they don't know about you they don't want you.

The dream factories like 'American Idol' are a long shot for an artist to get discovered. Having an A & R person from a major record label end up at the live show and offering you a deal is another long shot.

You're probably thinking, "Hey I thought this was going to be about taping my live show", we will be getting into that later in this article. I just wanted to set the stage for how important a marketing tool a promotional video is to an artist.

Thousands and thousands of unsolicited CD's are sent off to record labels by hungry artists every month. They range from the submissions that are labeled by hand that always end up in the trash to the more well packaged CD's that include artwork or maybe a press kit.

An awesome way to make your CD submission stand out and get noticed is to include some footage of you performing live. I guarantee it will make you more appealing to record labels as an artist. Music videos are a different animal all together, but in this article I want to focus on sharing with you how to shoot a promotional video for next to nothing.

Maximize the opportunity you have to perform at a venue in front of a live audience to the absolute fullest by taping your performance. A performance lasts for one night, while a promotional video of you crushing your set lasts a lot longer.

Regardless if you're the opening act or headliner you're taking the stage to rock the show. You know you're the next big thing. Unfortunately, many talented artists do not have major music labels or sizable marketing budgets behind them when they start to have a professional camera crew tape their show and capture behind the scenes interviews.

I taped live shows for a music management company. Sometimes I had a camera crew of four, but most of the time it was only me as a one man camera crew. I learned a lot and saw a lot covering these shows at clubs all over Southern California.

Some artists make the mistake of having a friend or family member tape the show on any camcorder with nothing more than the infamous words, 'just point and shoot' as guidance. The performance captured is often grainy, out of focus, or you get dizzy from the zooms in and out.

You've just lost a powerful marketing tool when you didn't have to. Be clear in what you want. It's easier then ever to tape a show for next to nothing that looks good. I avoided getting into specific video equipment, software, and other non-essentials. This is all about the shoot. Now let's get to it.

Tip #1: Plan. Planning the shoot yourself doesn't cost anything but some footwork and energy. Who cares more about your career than you? Let whoever is running the show know you're going to have your performance taped. This will keep your camera crew from being hassled, be it one person or more. Know the layout of the venue and get there early. Be realistic. If you have one person behind a camera do not expect them to be everywhere at once. Work with within your resources. The most important images to capture are of you on stage in the moment. Let your camera crew know how long you're going to be in the spotlight. Nothing worse than running low on tape or battery power.

Whoever you have running the camera won't be a professional, but that doesn't mean you can't plan like one. Hand out a simple shot sheet telling them what you want. If you want tight mostly close-ups of yourself or wider shots with all the performers on stage let them know. They might not be able to get all of it, but they won't waste tape on useless footage either.

Be positive that whoever is taping your show knows how to work the camera. We've all heard someone ask, 'What button do I push to record'. I would have them practice. It might seem stupid, but doing a walk through rehearsal of your show with them taping it will be a big help. You can shoot it in your living room, garage, or backyard. The key is to act like it's the stage and let your natural movements come out. It's like a director does when he has actors walk through a scene so he can plan where the camera needs to be. It's called blocking. Anything can happen in the moments on stage, but your camera crew will be ready to roll with you because you've planned.

Things are going to be very chaotic at the show. You will be focused on doing what you need to do and that's performing. If you take the time before the shoot to plan as much as possible will payoff huge when it's show time.

Tip #2: Two is better than one. Hustle to get a second camera for the shoot. Go online and look for college kids advertising themselves as videographers or filmmakers in your area. Visit the local colleges and post flyers. Sell them on how hot the show is going to be, the beautiful people, etc. Be straight away that you can't pay them. But would they rather be at home or out taping a rising music force? They need the experience and resume filler, you need the extra camera.

If you find someone always provide them the videotape, $20 for gas, and your deepest thanks. Sometimes believe it or not your friends or family will bail on you. This backup camera person might be all you have to cover the show. If they agree early enough make sure you get them your shot sheet and outline of what you want just in case they do end up covering your ass. I worked for free in college sometimes when a show was supposed to be hot. Those were good times I had. No money, but I saw some amazing shows and mixed with some very cool people. Sell them on that.

If you come up short finding someone you don't know to work for free, hit up everyone you know to lend you their camera, hopefully with them as a human tripod. I was doing a show hip hop show at the Santa Monica Pier and the crowd was going to be huge. I begged a friend to come with and bring her camera. She stood in the middle of the crowd with her camera and didn't move. She was my human tripod. I was able to move around more and get better shots because I knew she had the master of the show pretty well covered if I got in a pinch.

Tip #3: One person and their camera. If you only land one person to tape your show don't trip. When the first lyric or sound from your performance explodes from the stage have the camera far back enough to capture you or the entire group. No matter if you're all over the stage you will always be in frame and on camera. This will also allow the crowd to be taped in the foreground filling the frame with energy.

Make sure the camera is above the crowd. Not towering over the crowd, but enough where the performers on stage are clearly visible. Each venue is different, that's why during your planning stage take a look at what your up against. Will you need a small step ladder? Will a chair work? Use this master shot to get a majority of your footage.

One thing I like to do is start back in this master then walk in to a closer shot mid-way from the stage, not zoom, walk. You captured the entire shows vibe from the back now you're moving in to make it more intimate. You don't need to get fancy here. You have to be steady.

I was working a show alone covering the background musicians. The headlining artist had their own three person camera crew.
They were all over the place and looked real professional laying on their backs, crouching, and striking all kinds of camera crew poses. I followed my master back and walk in formula. After the show these guys clowned me pretty hard about the way I taped the show.

They asked me if I got this, did I get that. One described in detail how he started on a extreme close-up of the guitar players pick while he was playing then zoomed out. A camera crew at a bar after a show always talk about the footage they got. I listened and actually felt I did a bad job covering the show compared to what these guys did.
Later I get a call from the music management company praising me on the footage I got.

Apparently the other guys wanted to direct a music video and it showed in the footage they taped. All their trick shots and gimmicks were mostly unusable. The artists record label actually used most of the footage I shot that night for a promotional video. I was just their to cover the background musicians, but luckily my simple formula captured the whole show.

That's what you want to do. Capture your whole show. Trust me a mostly master shot won't get boring at all. The key is to use this footage later as a promotional video of you as an artist. It's not meant to be some slick MTV style music video with quick cuts and crazy shots.

Tip #4: Forget in camera effects. Avoid using any in camera effects. You will be stuck with them and can't remove them from the footage if they look bad. I would stick with shooting the show in the normal camera setting. Let the performance and venue speak for itself. Plus the in camera effects will make it look like a total home video.
Later on if you feel the need to add effects do it with some over the counter editing software.

Tip #5: Do not use zoom or whips. Start off by putting tape on the zoom button or control so it can't be used. Nothing viewers hate more than dizzying zooms. How often have you watched a home movie where people went zoom happy? I for one can't watch videos like that. Think of the reaction you will get when you send out your promotional video to a record label or to anyone you're contacting to further your music career.

If you want to move into a closer shot always slowly walk in to the subject. If the crowd makes it hard to do this cut the camera off and fight your way to the spot you need to be. Don't sweat turning the camera off. The footage you got would have been useless shots of the ceiling, floor, and body parts of the crowd. When you're in the best spot you can get fire up that camera and shoot away.

Don't whip the camera to some action on the stage then whip to something crazy that happens in the crowd. The footage will be all over the place and have less impact. The fight in the crowd might be pretty cool, but are you there to get footage of an artist performing or taping a reality video? Stay focused. You can follow the action and adjust. Just make sure every move you make has a reason and is not over done.

The bottom line is to shoot in the performance in blocks. Get a master of the over all performance with closer still shots mixed in. Watch other promotional videos or the news and you'll see it's a series of locked down shots.

Tip #6: Wear headphones: Almost everyone has headphones already.If not they are inexpensive to buy. It's a must that you plug them into the camera when the show is being taped. The audio you capture when shooting a live show will not always be pristine, but it helps to know what audio you are getting.

Stay with using the cameras built in audio mic. You do not need to make the audio set up more complicated at this stage by adding an a external mic or plugging into the venues sound system. I can't stress it enough stick with the camera's built in mic for all your audio needs related to the show including behind the scenes interviews. People say whenever you can use an external mic and avoid the built in camera mic. For your situation of shooting a promotional video for next to nothing you'll be fine with the in camera mic.
If you get distortion or the audio is too loud where you're taping at you'll know by wearing the headphones. Then you can adjust and move your filming position. I am not audio expert or sound mixer. I use common sense and my ear to gauge the audio of the video I'm shooting. It seems to work.

Tip #7: Keep the camera steady. If you can absolutely buy or borrow a tripod for the camera you will be using. Shaky camera work will take away from the performance on tape. Nothing is better than footage that is well framed and steady. The beauty of a tripod is you can set your shot, lock off, and let the camera roll. A good rule of thumb is to hold shots for at least 20 seconds before moving the camera angle.

If you can't get a tripod lean against something to support yourself if possible. You can also lock your elbows close to your body with your eye firmly in the viewfinder to reduce camera shake. I have on more than one occasion been forced to turn myself into a human tripod. It beats the heck out holding the camera with one hand.

Tip #8: Dealing with stage lighting. I've never met stage lighting that I liked as a camera operator. In fact you will hate it. Mostly because you're the only one that will be concerned with the lighting. Everyone else in the place will give two shakes about your lighting issues.

It doesn't hurt to ask the lighting person to turn up the lights a little for the performance. Low moody light is good for the live crowd watching, but bad for your video.

I was taping a rap artist at a small club in Los Angeles. The house lights were turned down to almost nothing and the stage was lit with a few lights. I asked the lights be turned up a little and was told no. Another time the artist requested that the lights be turned up slightly while they performed and "presto" they made it happen. An artist always carries more weight than a grunt camera operator.

I will avoid going into a technical rant about gain levels etc. But I'm figuring if you're having a non-professional or fairly inexperienced person tape your show that will only add to confusion. I want to keep it to the basics that anyone can handle to improve the quality of footage being taped of the the show. If you have a more camera savvy person taping they will already know the deal on gain etc.

It's not a bad idea to buy a light for the camera. You get these at major electronic retailers for as cheap as $20. They can even be used off the camera in some situations. I was in a jam once near center stage and had to cradle the camera while sticking the light closer to the artist with my free hand. They're small size makes them great on the move. These small lights won't give you a huge light boost, but it will help.

If you can use the Auto-Exposure this is a great time to do it. Outdoors camera's adjust much better to lighting. Indoors you need to adjust to the lighting you're dealing with. This goes back to planning stage. If you were able to practice using the camera Auto-Focus will not be intimidating to you. Low light means you will have to open the eye of the camera up as much as possible. This should get you through.

Tip #9: Be low key. The crowd is unavoidable at shows. They will cross your in front of your camera when you're taping. They'll look into the camera and all the things we've seen people do when they know a camera is present. Try to be as low key as possible. Be the fly on the wall. You do not want the artists on stage or crowd distracted by you.

This is where it's to your advantage to not have a full blown professional camera crew coming into the venue like a bull in a china shop. People become keenly aware of cameras and act differently. You want the footage to be as natural as possible.

Start by turning off the red light on the camera when you hit record. Cover it with tape if you need to. I have found at live shows the light is distracting to those around you. Earlier I talked about getting a light for the camera. The same thing applies here. If you do not need to turn on the light don't.

When people see that camera light they cover their faces and other things. They're doing everything but acting natural when they see the light. Pick and choose the spots where your camera light needs to be used.

Tip #10: Always get a backstage interview. As soon as your done with your show take time to give an interview backstage to your camera person. You'll be pumped up and that will comes across on the video. You might even be able to get other artists to talk about your performance giving you more credibility, especially if they have a name already.

A real interview away from the phony studio setting or well rehearsed interview by some news person is much more interesting. Here you are fresh from performing backstage at some venue speaking with emotion about your music. You have to be your number one salesmen.
The editing of the footage is something else all together. With the information I've shared you will have better footage to work with in post-production. One last tip I can give is that if you do not have access to editing software to cut your footage into a promotional video look for college students or people looking to break into editing. Sometime they will do it for free to have something to show and build their resume. Could be good for both of you. Best with everything. Maybe you can your music video or live performance shown on Americana VOD.

Slice of Americana Films is a tight-knit crew that produces indie cinema and video on demand programming. Founder and filmmaker Sid Kali is best known for his hard-hitting urban movies that feature authentic characters, sharp dialogue and provocative storylines.
Sid's book The First Movie Is The Toughest [http://www.sidkaliflicks.com/book.html] is a powerful resource for for aspiring screenwriters, directors, and producers along with the casual reader with their own great story idea for a movie. Every chapter has solid information that will help you avoid many common problems and save you money through every stage of production from script to distribution.